Restart OpenCode web terminal

/root · 6/11/2026, 8:12:05 PM · 0 Files +0 -0

Export MD Export JSON

Task List

✓ Update opencode global config model to deepseek/deepseek-v4-flash
✓ Restart opencode-server pm2 process on port 5051 with hostname 0.0.0.0
✓ Verify server is accessible on http://100.67.221.82:5051

user openrouter/nvidia/nemotron-3-ultra-550b-a55b:free 6/11/2026

restart the opencode web terminal on http://100.67.221.82:5051 this is the tailscale ip yes yes fix it

user opencode/deepseek-v4-flash-free 6/11/2026

set this model as default tmodel from opencode zen

skill completed 0s

Input

{
  "name": "customize-opencode"
}

Output

<skill_content name="customize-opencode">
# Skill: customize-opencode

<!--
  Built-in skill. Name and description are registered in code at
  packages/opencode/src/skill/index.ts (see CUSTOMIZE_OPENCODE_SKILL_NAME
  and CUSTOMIZE_OPENCODE_SKILL_DESCRIPTION). The body below becomes the
  skill's content.
-->

# Customizing opencode

opencode validates its own config strictly and refuses to start when a field
is wrong. The shapes below cover the common surface area, but they are a
**summary, not the source of truth**.

## Full schema reference

The authoritative list of every config option — with field types, enums,
defaults, and descriptions — lives in the published JSON Schema:

**<https://opencode.ai/config.json>**

If a field is not documented in this skill, or you need to confirm an exact
shape before writing config, **fetch that URL and read the schema directly**
rather than guessing. opencode hard-fails on invalid config, so the cost of a
wrong shape is a broken startup.

Independently, every `opencode.json` should declare
`"$schema": "https://opencode.ai/config.json"` so the user's editor catches
mistakes as they type.

## Applying changes

Config is loaded once when opencode starts and is not hot-reloaded. After
saving changes to `opencode.json`, an agent file, a skill, a plugin, or any
other config-time file, **tell the user to quit and restart opencode** for
the changes to take effect. The running session will keep using the
already-loaded config until then.

## Where files live

| Scope                         | Path                                                                                                                      |
| ----------------------------- | ------------------------------------------------------------------------------------------------------------------------- |
| Project config                | `./opencode.json`, `./opencode.jsonc`, or `.opencode/opencode.json` (opencode walks up from the cwd to the worktree root) |
| Global config                 | `~/.config/opencode/opencode.json` (NOT `~/.opencode/`)                                                                   |
| Project agents                | `.opencode/agent/<name>.md` or `.opencode/agents/<name>.md`                                                               |
| Global agents                 | `~/.config/opencode/agent(s)/<name>.md`                                                                                   |
| Project skills                | `.opencode/skill(s)/<name>/SKILL.md`                                                                                      |
| Global skills                 | `~/.config/opencode/skill(s)/<name>/SKILL.md`                                                                             |
| External skills (auto-loaded) | `~/.claude/skills/<name>/SKILL.md`, `~/.agents/skills/<name>/SKILL.md`                                                    |

Configs from each scope are deep-merged. Project overrides glo

…truncated

glob — **/opencode.json* completed 1s

Input

{
  "pattern": "**/opencode.json*"
}

Output

/root/.config/opencode/opencode.jsonc
/root/sandbox/opencode.json

glob — ~/.config/opencode/opencode.json* completed 1s

Input

{
  "pattern": "~/.config/opencode/opencode.json*"
}

Output

No files found

bash — pm2 list 2>/dev/null || echo "pm2 not available" completed 0s

Input

{
  "command": "pm2 list 2>/dev/null || echo \"pm2 not available\"",
  "description": "Check pm2 process list"
}

Output

┌────┬────────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name               │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼────────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 0  │ opencode-server    │ default     │ N/A     │ fork    │ 729968   │ 6D     │ 0    │ online    │ 0%       │ 222.3mb  │ root     │ disabled │
│ 1  │ tg-bot             │ default     │ N/A     │ fork    │ 739958   │ 6D     │ 2    │ online    │ 0%       │ 75.9mb   │ root     │ disabled │
└────┴────────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘

read — /root/.config/opencode/opencode.jsonc completed 0s

Input

{
  "filePath": "/root/.config/opencode/opencode.jsonc"
}

Output

<path>/root/.config/opencode/opencode.jsonc</path>
<type>file</type>
<content>
1: {
2:   "$schema": "https://opencode.ai/config.json",
3:   "model": "openrouter/nvidia/nemotron-3-ultra-550b-a55b:free",
4:   "provider": {
5:     "openrouter": {
6:       "options": {
7:         "apiKey": "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"
8:       },
9:       "models": {
10:         "deepseek/deepseek-r1:free": {
11:           "variants": {
12:             "reasoning": {
13:               "reasoningEffort": "high"
14:             }
15:           }
16:         }
17:       }
18:     }
19:   },
20:   "plugin": [
21:     "@theedgeofrage/opencode-telegram@latest",
22:     "@different-ai/opencode-browser",
23:     "opencode-codebase-index",
24:     "opencode-lore",
25:     "oh-my-opencode-slim"
26:   ]
27: }

(End of file - total 27 lines)
</content>

read — /root/sandbox/opencode.json completed 0s

Input

{
  "filePath": "/root/sandbox/opencode.json"
}

Output

<path>/root/sandbox/opencode.json</path>
<type>file</type>
<content>
1: {
2:   "$schema": "https://opencode.ai/config.json",
3:   "model": "openrouter/google/gemini-2.5-flash:free"
4: }

(End of file - total 4 lines)
</content>

bash — pm2 show opencode-server 2>/dev/null completed 0s

Input

{
  "command": "pm2 show opencode-server 2>/dev/null",
  "description": "Check opencode-server pm2 details"
}

Output

 Describing process with id 0 - name opencode-server 
┌───────────────────┬───────────────────────────────────────────┐
│ status            │ online                                    │
│ name              │ opencode-server                           │
│ namespace         │ default                                   │
│ version           │ N/A                                       │
│ restarts          │ 0                                         │
│ uptime            │ 6D                                        │
│ script path       │ /usr/bin/bash                             │
│ script args       │ -c opencode serve --port 4096             │
│ error log path    │ /root/.pm2/logs/opencode-server-error.log │
│ out log path      │ /root/.pm2/logs/opencode-server-out.log   │
│ pid path          │ /root/.pm2/pids/opencode-server-0.pid     │
│ interpreter       │ none                                      │
│ interpreter args  │ N/A                                       │
│ script id         │ 0                                         │
│ exec cwd          │ /root/sandbox/jarvis                      │
│ exec mode         │ fork_mode                                 │
│ node.js version   │ N/A                                       │
│ node env          │ N/A                                       │
│ watch & reload    │ ✘                                         │
│ unstable restarts │ 0                                         │
│ created at        │ 2026-06-04T20:45:09.379Z                  │
└───────────────────┴───────────────────────────────────────────┘
 Divergent env variables from local env 
┌─────────────────┬──────────────────────────────────────┐
│ PWD             │ /root/sandbox/jarvis                 │
│ OPENCODE_PID    │ 728878                               │
│ OPENCODE_RUN_ID │ ae7d756f-ddc9-4be3-8d2f-3b316203167b │
│ SSH_CONNECTION  │ 87.67.231.42 64606 185.228.81.207 22 │
│ XDG_SESSION_ID  │ 14208301                             │
│ SSH_CLIENT      │ 87.67.231.42 64606 22                │
└─────────────────┴──────────────────────────────────────┘

 Add your own code metrics: http://bit.ly/code-metrics
 Use `pm2 logs opencode-server [--lines 1000]` to display logs
 Use `pm2 env 0` to display environment variables
 Use `pm2 monit` to monitor CPU and Memory usage opencode-server

bash — ls /root/.pm2/*.json /root/.pm2/*.yml 2>/dev/null; pm2 dump 2>/dev/null | head -5; cat /root/.pm2/dump.pm2 2>/dev/null || echo "no dump file" completed 0s

Input

{
  "command": "ls /root/.pm2/*.json /root/.pm2/*.yml 2>/dev/null; pm2 dump 2>/dev/null | head -5; cat /root/.pm2/dump.pm2 2>/dev/null || echo \"no dump file\"",
  "description": "Check pm2 ecosystem config"
}

Output

/root/.pm2/module_conf.json
[PM2] Saving current process list...
[PM2] Successfully saved in /root/.pm2/dump.pm2
[
  {
    "name": "opencode-server",
    "filter_env": [],
    "namespace": "default",
    "args": [
      "-c",
      "opencode serve --port 4096"
    ],
    "env": {
      "SHELL": "/bin/bash",
      "OPENCODE_PROCESS_ROLE": "worker",
      "AGENT": "1",
      "PWD": "/root/sandbox/jarvis",
      "LOGNAME": "root",
      "XDG_SESSION_TYPE": "tty",
      "MOTD_SHOWN": "pam",
      "OPENCODE_PID": "728878",
      "HOME": "/root",
      "OPENCODE": "1",
      "LS_COLORS": "rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:",
      "OPENCODE_RUN_ID": "ae7d756f-ddc9-4be3-8d2f-3b316203167b",
      "SSH_CONNECTION": "87.67.231.42 64606 185.228.81.207 22",
      "LESSCLOSE": "/usr/bin/lesspipe %s %s",
      "XDG_SESSION_CLASS": "user",
      "TERM": "xterm-256color",
      "LESSOPEN": "| /usr/bin/lesspipe %s",
      "USER": "root",
      "SHLVL": "2",
      "XDG_SESSION_ID": "14208301",
      "npm_config_user_agent": "npm/undefined node/v24.3.0 linux x64 workspaces/false",
      "XDG_RUNTIME_DIR": "/run/user/0",
      "SSH_CLIENT": "87.67.231.42 64606 22",
      "PATH": "/root/.opencode/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin",
      "SSH_TTY": "/dev/pts/0",
      "OLDPWD": "/root/sandbox",
      "_": "/usr/bin/pm2",
      "PM2_USAGE": "CLI",
      "PM2_HOME": "/root/.pm2",
      "opencode-server": {},
      "unique_id": "8ba48e9f-2aee-4a99-bddb-960e

…truncated

bash — ss -tlnp | grep -E '4096|5051' 2>/dev/null || netstat -tlnp 2>/dev/null | grep -E '4096|5051' completed 0s

Input

{
  "command": "ss -tlnp | grep -E '4096|5051' 2>/dev/null || netstat -tlnp 2>/dev/null | grep -E '4096|5051'",
  "description": "Check what's listening on ports 4096 and 5051"
}

Output

LISTEN 0      128                      127.0.0.1:4096       0.0.0.0:*    users:(("opencode",pid=729968,fd=19))

grep — zen completed 0s

Input

{
  "pattern": "zen",
  "path": "/root/.config/opencode"
}

Output

No files found

grep — zen|deepseek completed 0s

Input

{
  "pattern": "zen|deepseek",
  "path": "/root/sandbox",
  "include": "*.{json,jsonc,md,txt}"
}

Output

Found 1 matches
/root/sandbox/french_revolution_essay.md:
  Line 15: The Revolution unfolded in distinct phases. In June 1789, the Third Estate declared itself the National Assembly, swearing the Tennis Court Oath not to disband until a constitution was established. Days later, on July 14, Parisian crowds stormed the Bastille—a royal fortress and prison—an act that became the revolution's enduring symbol. In August, the Assembly abolished feudal privileges and issued the Declaration of the Rights of Man and of the Citizen, proclaiming that "men are born and remain free and equal in rights."

bash — opcode serve --help 2>&1 || opencode serve --help 2>&1 || opencode --help 2>&1 | head -40 completed 0s

Input

{
  "description": "Check opencode CLI help for serve",
  "command": "opcode serve --help 2>&1 || opencode serve --help 2>&1 || opencode --help 2>&1 | head -40"
}

Output

/bin/bash: line 1: opcode: command not found
opencode serve

starts a headless opencode server

Options:
  -h, --help         show help                                                             [boolean]
  -v, --version      show version number                                                   [boolean]
      --print-logs   print logs to stderr                                                  [boolean]
      --log-level    log level                  [string] [choices: "DEBUG", "INFO", "WARN", "ERROR"]
      --pure         run without external plugins                                          [boolean]
      --port         port to listen on                                         [number] [default: 0]
      --hostname     hostname to listen on                           [string] [default: "127.0.0.1"]
      --mdns         enable mDNS service discovery (defaults hostname to 0.0.0.0)
                                                                          [boolean] [default: false]
      --mdns-domain  custom domain name for mDNS service (default: opencode.local)
                                                                [string] [default: "opencode.local"]
      --cors         additional domains to allow for CORS                      [array] [default: []]

bash — which opencode && opencode --version 2>&1 completed 0s

Input

{
  "description": "Check opencode version and commands",
  "command": "which opencode && opencode --version 2>&1"
}

Output

/root/.opencode/bin/opencode
1.15.13

bash — opencode config get model 2>&1 completed 0s

Input

{
  "command": "opencode config get model 2>&1",
  "description": "Check current effective model config"
}

Output

⠀                                ▄     
█▀▀█ █▀▀█ █▀▀█ █▀▀▄ █▀▀▀ █▀▀█ █▀▀█ █▀▀█
█  █ █  █ █▀▀▀ █  █ █    █  █ █  █ █▀▀▀
▀▀▀▀ █▀▀▀ ▀▀▀▀ ▀  ▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀

Commands:
  opencode completion          generate shell completion script
  opencode acp                 start ACP (Agent Client Protocol) server
  opencode mcp                 manage MCP (Model Context Protocol) servers
  opencode [project]           start opencode tui                                          [default]
  opencode attach <url>        attach to a running opencode server
  opencode run [message..]     run opencode with a message
  opencode debug               debugging and troubleshooting tools
  opencode providers           manage AI providers and credentials                   [aliases: auth]
  opencode agent               manage agents
  opencode upgrade [target]    upgrade opencode to the latest or a specific version
  opencode uninstall           uninstall opencode and remove all related files
  opencode serve               starts a headless opencode server
  opencode web                 start opencode server and open web interface
  opencode models [provider]   list all available models
  opencode stats               show token usage and cost statistics
  opencode export [sessionID]  export session data as JSON
  opencode import <file>       import session data from JSON file or URL
  opencode github              manage GitHub agent
  opencode pr <number>         fetch and checkout a GitHub PR branch, then run opencode
  opencode session             manage sessions
  opencode plugin <module>     install plugin and update config                      [aliases: plug]
  opencode db                  database tools

Positionals:
  project  path to start opencode in                                                        [string]

Options:
  -h, --help         show help                                                             [boolean]
  -v, --version      show version number                                                   [boolean]
      --print-logs   print logs to stderr                                                  [boolean]
      --log-level    log level                  [string] [choices: "DEBUG", "INFO", "WARN", "ERROR"]
      --pure         run without external plugins                                          [boolean]
      --port         port to listen on                                         [number] [default: 0]
      --hostname     hostname to listen on                           [string] [default: "127.0.0.1"]
      --mdns         enable mDNS service discovery (defaults hostname to 0.0.0.0)
                                                                          [boolean] [default: false]
      --mdns-domain  custom domain name for mDNS service (default: opencode.local)
                                                                [string] [default: "opencode.local"]
      --cors         additional domains to allow for CORS                      [array

…truncated

bash — opencode config get small_model 2>&1 || echo "no small_model" completed 0s

Input

{
  "command": "opencode config get small_model 2>&1 || echo \"no small_model\"",
  "description": "Check if small_model is set"
}

Output

⠀                                ▄     
█▀▀█ █▀▀█ █▀▀█ █▀▀▄ █▀▀▀ █▀▀█ █▀▀█ █▀▀█
█  █ █  █ █▀▀▀ █  █ █    █  █ █  █ █▀▀▀
▀▀▀▀ █▀▀▀ ▀▀▀▀ ▀  ▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀

Commands:
  opencode completion          generate shell completion script
  opencode acp                 start ACP (Agent Client Protocol) server
  opencode mcp                 manage MCP (Model Context Protocol) servers
  opencode [project]           start opencode tui                                          [default]
  opencode attach <url>        attach to a running opencode server
  opencode run [message..]     run opencode with a message
  opencode debug               debugging and troubleshooting tools
  opencode providers           manage AI providers and credentials                   [aliases: auth]
  opencode agent               manage agents
  opencode upgrade [target]    upgrade opencode to the latest or a specific version
  opencode uninstall           uninstall opencode and remove all related files
  opencode serve               starts a headless opencode server
  opencode web                 start opencode server and open web interface
  opencode models [provider]   list all available models
  opencode stats               show token usage and cost statistics
  opencode export [sessionID]  export session data as JSON
  opencode import <file>       import session data from JSON file or URL
  opencode github              manage GitHub agent
  opencode pr <number>         fetch and checkout a GitHub PR branch, then run opencode
  opencode session             manage sessions
  opencode plugin <module>     install plugin and update config                      [aliases: plug]
  opencode db                  database tools

Positionals:
  project  path to start opencode in                                                        [string]

Options:
  -h, --help         show help                                                             [boolean]
  -v, --version      show version number                                                   [boolean]
      --print-logs   print logs to stderr                                                  [boolean]
      --log-level    log level                  [string] [choices: "DEBUG", "INFO", "WARN", "ERROR"]
      --pure         run without external plugins                                          [boolean]
      --port         port to listen on                                         [number] [default: 0]
      --hostname     hostname to listen on                           [string] [default: "127.0.0.1"]
      --mdns         enable mDNS service discovery (defaults hostname to 0.0.0.0)
                                                                          [boolean] [default: false]
      --mdns-domain  custom domain name for mDNS service (default: opencode.local)
                                                                [string] [default: "opencode.local"]
      --cors         additional domains to allow for CORS                      [array

…truncated

bash — opencode models openrouter 2>&1 | grep -i deep completed 0s

Input

{
  "command": "opencode models openrouter 2>&1 | grep -i deep",
  "description": "List available deepseek models via openrouter"
}

Output

openrouter/deepcogito/cogito-v2.1-671b
openrouter/deepseek/deepseek-chat
openrouter/deepseek/deepseek-chat-v3-0324
openrouter/deepseek/deepseek-chat-v3.1
openrouter/deepseek/deepseek-r1
openrouter/deepseek/deepseek-r1-0528
openrouter/deepseek/deepseek-r1-distill-llama-70b
openrouter/deepseek/deepseek-r1-distill-qwen-32b
openrouter/deepseek/deepseek-r1:free
openrouter/deepseek/deepseek-v3.1-terminus
openrouter/deepseek/deepseek-v3.2
openrouter/deepseek/deepseek-v3.2-exp
openrouter/deepseek/deepseek-v4-flash
openrouter/deepseek/deepseek-v4-pro
openrouter/openai/o3-deep-research
openrouter/openai/o4-mini-deep-research
openrouter/perplexity/sonar-deep-research

bash — opencode session --help 2>&1 completed 0s

Input

{
  "command": "opencode session --help 2>&1",
  "description": "Check session serve command"
}

Output

opencode session

manage sessions

Commands:
  opencode session list                list sessions
  opencode session delete <sessionID>  delete a session

Options:
  -h, --help        show help                                                              [boolean]
  -v, --version     show version number                                                    [boolean]
      --print-logs  print logs to stderr                                                   [boolean]
      --log-level   log level                   [string] [choices: "DEBUG", "INFO", "WARN", "ERROR"]
      --pure        run without external plugins                                           [boolean]

bash — opencode models openrouter 2>&1 | grep -i "v4-flash" completed 0s

Input

{
  "command": "opencode models openrouter 2>&1 | grep -i \"v4-flash\"",
  "description": "Check v4-flash model details"
}

Output

openrouter/deepseek/deepseek-v4-flash

bash — opencode models openrouter 2>&1 | grep -i "free" completed 0s

Input

{
  "command": "opencode models openrouter 2>&1 | grep -i \"free\"",
  "description": "List free models on openrouter"
}

Output

openrouter/cognitivecomputations/dolphin-mistral-24b-venice-edition:free
openrouter/deepseek/deepseek-r1:free
openrouter/google/gemma-4-26b-a4b-it:free
openrouter/google/gemma-4-31b-it:free
openrouter/liquid/lfm-2.5-1.2b-instruct:free
openrouter/liquid/lfm-2.5-1.2b-thinking:free
openrouter/meta-llama/llama-3.2-3b-instruct:free
openrouter/meta-llama/llama-3.3-70b-instruct:free
openrouter/nex-agi/nex-n2-pro:free
openrouter/nousresearch/hermes-3-llama-3.1-405b:free
openrouter/nvidia/nemotron-3-nano-30b-a3b:free
openrouter/nvidia/nemotron-3-nano-omni-30b-a3b-reasoning:free
openrouter/nvidia/nemotron-3-super-120b-a12b:free
openrouter/nvidia/nemotron-3-ultra-550b-a55b:free
openrouter/nvidia/nemotron-3.5-content-safety:free
openrouter/nvidia/nemotron-nano-12b-v2-vl:free
openrouter/nvidia/nemotron-nano-9b-v2:free
openrouter/openai/gpt-oss-120b:free
openrouter/openai/gpt-oss-20b:free
openrouter/openrouter/free
openrouter/poolside/laguna-m.1:free
openrouter/poolside/laguna-xs.2:free
openrouter/qwen/qwen3-coder:free
openrouter/qwen/qwen3-next-80b-a3b-instruct:free

edit — /root/.config/opencode/opencode.jsonc completed 0s

Input

{
  "filePath": "/root/.config/opencode/opencode.jsonc",
  "oldString": "\"model\": \"openrouter/nvidia/nemotron-3-ultra-550b-a55b:free\"",
  "newString": "\"model\": \"openrouter/deepseek/deepseek-v4-flash\""
}

Output

Edit applied successfully.

bash — pm2 delete opencode-server && pm2 start bash --name "opencode-server" -c "opencode serve --port 5051 --hostname 0.0.0.0" --cwd /root/sandbox/jarvis completed 0s

Input

{
  "command": "pm2 delete opencode-server && pm2 start bash --name \"opencode-server\" -c \"opencode serve --port 5051 --hostname 0.0.0.0\" --cwd /root/sandbox/jarvis",
  "description": "Restart opencode server on port 5051 all interfaces",
  "timeout": 15000
}

Output

[PM2] Applying action deleteProcessId on app [opencode-server](ids: [ 0 ])
[PM2] [opencode-server](0) ✓
┌────┬───────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name      │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼───────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 1  │ tg-bot    │ default     │ N/A     │ fork    │ 739958   │ 6D     │ 2    │ online    │ 5.9%     │ 87.9mb   │ root     │ disabled │
└────┴───────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
[PM2] cron restart at opencode serve --port 5051 --hostname 0.0.0.0
[PM2][ERROR] Cron pattern error: CronPattern: configuration entry 0 (opencode) contains illegal characters.

bash — pm2 start /usr/bin/bash --interpreter none --name "opencode-server" -- -c "opencode serve --port 5051 --hostname 0.0.0.0" && pm2 save completed 0s

Input

{
  "command": "pm2 start /usr/bin/bash --interpreter none --name \"opencode-server\" -- -c \"opencode serve --port 5051 --hostname 0.0.0.0\" && pm2 save",
  "description": "Start opencode server properly with pm2",
  "timeout": 15000
}

Output

[PM2] Starting /usr/bin/bash in fork_mode (1 instance)
[PM2] Done.
┌────┬────────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name               │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼────────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 2  │ opencode-server    │ default     │ N/A     │ fork    │ 804314   │ 0s     │ 0    │ online    │ 0%       │ 23.8mb   │ root     │ disabled │
│ 1  │ tg-bot             │ default     │ N/A     │ fork    │ 739958   │ 6D     │ 2    │ online    │ 0%       │ 87.9mb   │ root     │ disabled │
└────┴────────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
[PM2] Saving current process list...
[PM2] Successfully saved in /root/.pm2/dump.pm2

bash — sleep 2 && ss -tlnp | grep 5051 completed 0s

Input

{
  "command": "sleep 2 && ss -tlnp | grep 5051",
  "description": "Check if server is listening on port 5051",
  "timeout": 10000
}

Output

LISTEN 0      128                        0.0.0.0:5051       0.0.0.0:*    users:(("opencode",pid=804314,fd=19))

bash — curl -s -o /dev/null -w "%{http_code}" http://100.67.221.82:5051/ completed 0s

Input

{
  "command": "curl -s -o /dev/null -w \"%{http_code}\" http://100.67.221.82:5051/",
  "description": "Verify server accessible via Tailscale IP",
  "timeout": 10000
}

Output

bash — pm2 show opencode-server 2>/dev/null | grep -E "exec cwd|script args" completed 0s

Input

{
  "command": "pm2 show opencode-server 2>/dev/null | grep -E \"exec cwd|script args\"",
  "description": "Check current process details"
}

Output

│ script args       │ -c opencode serve --port 5051 --hostname 0.0.0.0 │
│ exec cwd          │ /root                                            │

bash — pm2 delete opencode-server && pm2 start /usr/bin/bash --interpreter none --cwd "/root/sandbox/jarvis" --name "opencode-server" -- -c "opencode serve --port 5051 --hostname 0.0.0.0" && pm2 save completed 0s

Input

{
  "command": "pm2 delete opencode-server && pm2 start /usr/bin/bash --interpreter none --cwd \"/root/sandbox/jarvis\" --name \"opencode-server\" -- -c \"opencode serve --port 5051 --hostname 0.0.0.0\" && pm2 save",
  "description": "Restart with correct working directory",
  "timeout": 15000
}

Output

[PM2] Applying action deleteProcessId on app [opencode-server](ids: [ 2 ])
[PM2] [opencode-server](2) ✓
┌────┬───────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name      │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼───────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 1  │ tg-bot    │ default     │ N/A     │ fork    │ 739958   │ 6D     │ 2    │ online    │ 1.2%     │ 87.9mb   │ root     │ disabled │
└────┴───────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
[PM2] Starting /usr/bin/bash in fork_mode (1 instance)
[PM2] Done.
┌────┬────────────────────┬─────────────┬─────────┬─────────┬──────────┬────────┬──────┬───────────┬──────────┬──────────┬──────────┬──────────┐
│ id │ name               │ namespace   │ version │ mode    │ pid      │ uptime │ ↺    │ status    │ cpu      │ mem      │ user     │ watching │
├────┼────────────────────┼─────────────┼─────────┼─────────┼──────────┼────────┼──────┼───────────┼──────────┼──────────┼──────────┼──────────┤
│ 3  │ opencode-server    │ default     │ N/A     │ fork    │ 804365   │ 0s     │ 0    │ online    │ 0%       │ 4.0kb    │ root     │ disabled │
│ 1  │ tg-bot             │ default     │ N/A     │ fork    │ 739958   │ 6D     │ 2    │ online    │ 0%       │ 87.9mb   │ root     │ disabled │
└────┴────────────────────┴─────────────┴─────────┴─────────┴──────────┴────────┴──────┴───────────┴──────────┴──────────┴──────────┴──────────┘
[PM2] Saving current process list...
[PM2] Successfully saved in /root/.pm2/dump.pm2

bash — sleep 2 && curl -s -o /dev/null -w "%{http_code}" http://100.67.221.82:5051/ && echo "" && pm2 show opencode-server | grep -E "exec cwd|script args|status" completed 0s

Input

{
  "command": "sleep 2 && curl -s -o /dev/null -w \"%{http_code}\" http://100.67.221.82:5051/ && echo \"\" && pm2 show opencode-server | grep -E \"exec cwd|script args|status\"",
  "description": "Verify server and process details",
  "timeout": 10000
}

Output

200
│ status            │ online                                           │
│ script args       │ -c opencode serve --port 5051 --hostname 0.0.0.0 │
│ exec cwd          │ /root/sandbox/jarvis                             │

assistant 38115 tokens · Input 176 · Output 51 6/11/2026

Done. Server restarted on http://100.67.221.82:5051 (listening on all interfaces, port 5051). Default model set to openrouter/deepseek/deepseek-v4-flash.

user opencode/deepseek-v4-flash-free 6/11/2026

well can you check if its doing something i gave it a huge prompt

bash — pm2 logs opencode-server --lines 50 --nostream completed 0s

Input

{
  "command": "pm2 logs opencode-server --lines 50 --nostream",
  "description": "Check opencode server recent logs",
  "timeout": 10000
}

Output

[TAILING] Tailing last 50 lines for [opencode-server] process (change the value with --lines option)
/root/.pm2/logs/opencode-server-out.log last 50 lines:
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWORD is not set; server is unsecured.
3|opencode | Warning: OPENCODE_SERVER_PASSWO

…truncated

bash — ls -la /root/.local/share/opencode/log/ 2>/dev/null | tail -10 completed 0s

Input

{
  "command": "ls -la /root/.local/share/opencode/log/ 2>/dev/null | tail -10",
  "description": "Check recent opencode log files"
}

Output

-rw-r--r-- 1 root root    1365 Jun  5 14:34 2026-06-05T143401.log
-rw-r--r-- 1 root root 1816855 Jun  5 14:50 2026-06-05T143402.log
-rw-r--r-- 1 root root    1641 Jun  9 08:39 2026-06-09T083524.log
-rw-r--r-- 1 root root   48633 Jun  9 08:39 2026-06-09T083525.log
-rw-r--r-- 1 root root    1365 Jun 11 20:11 2026-06-11T201052.log
-rw-r--r-- 1 root root  745660 Jun 11 20:27 2026-06-11T201055.log
-rw-r--r-- 1 root root    4348 Jun 11 20:21 2026-06-11T202120.log
-rw-r--r-- 1 root root    8625 Jun 11 20:21 2026-06-11T202130.log
-rw-r--r-- 1 root root     773 Jun 11 20:22 2026-06-11T202207.log
-rw-r--r-- 1 root root   10735 Jun 11 20:22 2026-06-11T202226.log

bash — pm2 logs opencode-server --lines 10 --nostream 2>/dev/null | tail -5; echo "---"; ps aux | grep opencode | grep -v grep completed 0s

Input

{
  "command": "pm2 logs opencode-server --lines 10 --nostream 2>/dev/null | tail -5; echo \"---\"; ps aux | grep opencode | grep -v grep",
  "description": "Check server current state and resource usage"
}

Output

3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181354.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [codebase-index] Skipping file watching and auto-indexing: no project marker found in "/root/sandbox/jarvis". Set "indexing.requireProjectMarker": false in config to override.

---
root      739958  0.0  3.8 11859488 81752 ?      Ssl  Jun05   7:20 node /root/.npm/_npx/96ab324e177a8c2c/node_modules/@grinev/opencode-telegram-bot/dist/cli.js start
root      740368  0.0  0.0 1335048    0 ?        Sl   Jun05   0:01 npm exec @different-ai/opencode-browser agent-gateway
root      740381  0.0  0.0   2876     0 ?        S    Jun05   0:00 sh -c opencode-browser agent-gateway
root      740382  0.0  0.0 1045268    4 ?        Sl   Jun05   0:00 node /root/.npm/_npx/8096bb92ae86a312/node_modules/.bin/opencode-browser agent-gateway
root      740389  0.0  0.1 881956  3980 ?        Sl   Jun05   0:00 /usr/bin/node /root/.npm/_npx/8096bb92ae86a312/node_modules/@different-ai/opencode-browser/bin/agent-gateway.cjs
root      743074  0.0  0.0 11659904 888 ?        Sl   Jun05   0:02 node /root/.config/opencode/node_modules/agent-browser/dist/daemon.js
root      803986 35.0 26.6 75098240 558464 pts/0 Rl+  20:10   5:43 opencode
root      804365 10.3 26.8 75107436 563832 ?     Ssl  20:22   0:29 opencode serve --port 5051 --hostname 0.0.0.0
root      804441 84.7  2.3  55440 48992 ?        Rs   20:23   3:25 git -c core.autocrlf=false -c core.longpaths=true -c core.symlinks=true --git-dir /root/.local/share/opencode/snapshot/global/42099b4af021e53fd8fd4e056c2568d7c2e3ffa8 --work-tree / add --all --sparse --pathspec-from-file=- --pathspec-file-nul

bash — tail -30 /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null completed 0s

Input

{
  "command": "tail -30 /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null",
  "description": "Check latest opencode log"
}

Output

INFO  2026-06-11T20:22:45 +58ms service=provider providerID=opencode found
INFO  2026-06-11T20:22:45 +3ms service=provider providerID=openrouter found
INFO  2026-06-11T20:22:45 +0ms service=provider status=completed duration=445 state
INFO  2026-06-11T20:22:46 +954ms service=provider providerID=opencode found
INFO  2026-06-11T20:22:46 +1ms service=provider providerID=openrouter found
INFO  2026-06-11T20:22:46 +0ms service=provider status=completed duration=1186 state
INFO  2026-06-11T20:22:47 +686ms service=server global event connected
INFO  2026-06-11T20:22:47 +114ms service=vcs branch=master initialized
INFO  2026-06-11T20:22:47 +0ms service=bus type=file.watcher.updated subscribing
INFO  2026-06-11T20:22:47 +18ms service=vcs branch=master initialized
INFO  2026-06-11T20:22:47 +0ms service=bus type=file.watcher.updated subscribing
INFO  2026-06-11T20:22:47 +101ms service=skill count=1 init
INFO  2026-06-11T20:22:53 +5329ms service=session id=ses_147a5e684ffeGVrhupNCrXZCUJ slug=nimble-garden version=1.15.13 projectID=global directory=/ path= title=New session - 2026-06-11T20:22:53.052Z cost=0 tokens={"input":0,"output":0,"reasoning":0,"cache":{"read":0,"write":0}} time={"created":1781209373052,"updated":1781209373052} created
INFO  2026-06-11T20:22:53 +11ms service=bus type=session.created publishing
INFO  2026-06-11T20:22:53 +1ms service=bus type=session.updated publishing
INFO  2026-06-11T20:22:53 +104ms service=bus type=session.next.agent.switched publishing
INFO  2026-06-11T20:22:53 +4ms service=bus type=session.next.model.switched publishing
INFO  2026-06-11T20:22:53 +24ms service=bus type=message.updated publishing
INFO  2026-06-11T20:22:53 +5ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:22:53 +9ms service=bus type=session.updated publishing
INFO  2026-06-11T20:22:53 +10ms service=bus type=session.status publishing
INFO  2026-06-11T20:22:53 +1ms service=session.prompt session.id=ses_147a5e684ffeGVrhupNCrXZCUJ step=0 loop
INFO  2026-06-11T20:22:53 +16ms service=bus type=message.updated publishing
INFO  2026-06-11T20:22:53 +27ms service=llm providerID=opencode modelID=deepseek-v4-flash-free session.id=ses_147a5e684ffeGVrhupNCrXZCUJ small=true agent=title mode=primary stream
INFO  2026-06-11T20:22:53 +2ms service=provider status=started providerID=opencode getSDK
INFO  2026-06-11T20:22:53 +0ms service=provider providerID=opencode pkg=@ai-sdk/openai-compatible using bundled provider
INFO  2026-06-11T20:22:53 +7ms service=provider status=completed duration=7 providerID=opencode getSDK
INFO  2026-06-11T20:22:53 +35ms service=default llm.runtime=ai-sdk llm.provider=opencode llm.model=deepseek-v4-flash-free llm runtime selected
INFO  2026-06-11T20:22:53 +118ms service=snapshot initialized
INFO  2026-06-11T20:22:57 +4292ms service=bus type=session.updated publishing

bash — tail -30 /root/.local/share/opencode/log/2026-06-11T202207.log 2>/dev/null completed 0s

Input

{
  "command": "tail -30 /root/.local/share/opencode/log/2026-06-11T202207.log 2>/dev/null",
  "description": "Check second latest opencode log"
}

Output

INFO  2026-06-11T20:22:07 +976ms service=default version=1.15.13 args=["serve","--port","5051","--hostname","0.0.0.0"] process_role=worker run_id=256b6b7a-6f6f-46e9-9307-d1aa78dcea9d opencode
INFO  2026-06-11T20:22:07 +34ms service=file init
INFO  2026-06-11T20:22:08 +544ms service=db path=/root/.local/share/opencode/opencode.db opening database
INFO  2026-06-11T20:22:08 +30ms service=db count=21 mode=bundled applying migrations
INFO  2026-06-11T20:22:08 +158ms service=config path=/root/.config/opencode/config.json loading
INFO  2026-06-11T20:22:08 +4ms service=config path=/root/.config/opencode/opencode.json loading
INFO  2026-06-11T20:22:08 +2ms service=config path=/root/.config/opencode/opencode.jsonc loading
INFO  2026-06-11T20:22:08 +116ms service=file init

bash — tail -30 /root/.local/share/opencode/log/2026-06-11T201055.log 2>/dev/null completed 0s

Input

{
  "command": "tail -30 /root/.local/share/opencode/log/2026-06-11T201055.log 2>/dev/null",
  "description": "Check the 745KB log file for activity"
}

Output

INFO  2026-06-11T20:27:19 +29ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +30ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +37ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +42ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +6ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +3ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +38ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +29ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:27:19 +125ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:27:19 +8ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:27:19 +369ms service=permission permission=bash pattern=tail -30 /root/.local/share/opencode/log/2026-06-11T201055.log 2>/dev/null action={"permission":"*","action":"allow","pattern":"*"} evaluated
INFO  2026-06-11T20:27:19 +13ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:27:19 +14ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:27:19 +37ms service=bus type=message.part.updated publishing

bash — ps aux | grep opencode | grep -v grep completed 0s

Input

{
  "command": "ps aux | grep opencode | grep -v grep",
  "description": "Check current CPU usage of processes"
}

Output

root      739958  0.0  3.8 11859488 81752 ?      Ssl  Jun05   7:20 node /root/.npm/_npx/96ab324e177a8c2c/node_modules/@grinev/opencode-telegram-bot/dist/cli.js start
root      740368  0.0  0.0 1335048    0 ?        Sl   Jun05   0:01 npm exec @different-ai/opencode-browser agent-gateway
root      740381  0.0  0.0   2876     0 ?        S    Jun05   0:00 sh -c opencode-browser agent-gateway
root      740382  0.0  0.0 1045268    4 ?        Sl   Jun05   0:00 node /root/.npm/_npx/8096bb92ae86a312/node_modules/.bin/opencode-browser agent-gateway
root      740389  0.0  0.1 881956  3984 ?        Sl   Jun05   0:00 /usr/bin/node /root/.npm/_npx/8096bb92ae86a312/node_modules/@different-ai/opencode-browser/bin/agent-gateway.cjs
root      743074  0.0  0.0 11659904 892 ?        Sl   Jun05   0:02 node /root/.config/opencode/node_modules/agent-browser/dist/daemon.js
root      803986 35.6 24.5 75099136 514788 pts/0 Rl+  20:10   5:52 opencode
root      804365 10.0 26.9 75107436 564496 ?     Ssl  20:22   0:29 opencode serve --port 5051 --hostname 0.0.0.0
root      804441 84.9  2.3  55440 48996 ?        Rs   20:23   3:34 git -c core.autocrlf=false -c core.longpaths=true -c core.symlinks=true --git-dir /root/.local/share/opencode/snapshot/global/42099b4af021e53fd8fd4e056c2568d7c2e3ffa8 --work-tree / add --all --sparse --pathspec-from-file=- --pathspec-file-nul

bash — tail -50 /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null completed 1s

Input

{
  "command": "tail -50 /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null",
  "description": "Check web server session log for activity"
}

Output

(no output)

bash — ls -la /root/.local/share/opencode/log/ | sort -t'-' -k2 -k3 | tail -5 completed 0s

Input

{
  "command": "ls -la /root/.local/share/opencode/log/ | sort -t'-' -k2 -k3 | tail -5",
  "description": "List all log files sorted by time"
}

Output

-rw-r--r-- 1 root root   96144 Jun  5 14:30 2026-06-05T142957.log
-rw-r--r-- 1 root root  867553 Jun 11 20:27 2026-06-11T201055.log
-rw-r--r-- 1 root root 1816855 Jun  5 14:50 2026-06-05T143402.log
drwxr-xr-x 2 root root    4096 Jun 11 20:22 .
drwxr-xr-x 7 root root    4096 Jun 11 20:22 ..

bash — pm2 logs opencode-server --lines 5 --nostream 2>/dev/null | tail -5; echo "==="; wc -l /root/.local/share/opencode/log/*.log 2>/dev/null completed 0s

Input

{
  "command": "pm2 logs opencode-server --lines 5 --nostream 2>/dev/null | tail -5; echo \"===\"; wc -l /root/.local/share/opencode/log/*.log 2>/dev/null",
  "description": "Check server's stdout for streaming activity"
}

Output

3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181354.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [codebase-index] Skipping file watching and auto-indexing: no project marker found in "/root/sandbox/jarvis". Set "indexing.requireProjectMarker": false in config to override.

===
   1152 /root/.local/share/opencode/log/2026-06-05T142957.log
     13 /root/.local/share/opencode/log/2026-06-05T143401.log
  21668 /root/.local/share/opencode/log/2026-06-05T143402.log
     16 /root/.local/share/opencode/log/2026-06-09T083524.log
    573 /root/.local/share/opencode/log/2026-06-09T083525.log
     13 /root/.local/share/opencode/log/2026-06-11T201052.log
  10859 /root/.local/share/opencode/log/2026-06-11T201055.log
     48 /root/.local/share/opencode/log/2026-06-11T202120.log
     95 /root/.local/share/opencode/log/2026-06-11T202130.log
      8 /root/.local/share/opencode/log/2026-06-11T202207.log
    116 /root/.local/share/opencode/log/2026-06-11T202226.log
  34561 total

bash — cat /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null | wc -l; cat /root/.local/share/opencode/log/2026-06-11T202207.log 2>/dev/null | wc -l completed 0s

Input

{
  "command": "cat /root/.local/share/opencode/log/2026-06-11T202226.log 2>/dev/null | wc -l; cat /root/.local/share/opencode/log/2026-06-11T202207.log 2>/dev/null | wc -l",
  "description": "Check line count of web server logs"
}

Output

116
8

read — /root/.local/share/opencode/log/2026-06-11T202226.log completed 0s

Input

{
  "filePath": "/root/.local/share/opencode/log/2026-06-11T202226.log"
}

Output

<path>/root/.local/share/opencode/log/2026-06-11T202226.log</path>
<type>file</type>
<content>
1: INFO  2026-06-11T20:22:26 +1067ms service=default version=1.15.13 args=["serve","--port","5051","--hostname","0.0.0.0"] process_role=worker run_id=256b6b7a-6f6f-46e9-9307-d1aa78dcea9d opencode
2: INFO  2026-06-11T20:22:26 +42ms service=file init
3: INFO  2026-06-11T20:22:27 +683ms service=db path=/root/.local/share/opencode/opencode.db opening database
4: INFO  2026-06-11T20:22:27 +405ms service=db count=21 mode=bundled applying migrations
5: INFO  2026-06-11T20:22:27 +328ms service=config path=/root/.config/opencode/config.json loading
6: INFO  2026-06-11T20:22:27 +11ms service=config path=/root/.config/opencode/opencode.json loading
7: INFO  2026-06-11T20:22:27 +0ms service=config path=/root/.config/opencode/opencode.jsonc loading
8: INFO  2026-06-11T20:22:27 +52ms service=file init
9: INFO  2026-06-11T20:22:44 +16631ms service=config path=/root/.config/opencode/config.json loading
10: INFO  2026-06-11T20:22:44 +8ms service=default directory=/root/sandbox/jarvis creating instance
11: INFO  2026-06-11T20:22:44 +4ms service=project directory=/root/sandbox/jarvis fromDirectory
12: INFO  2026-06-11T20:22:44 +3ms service=config path=/root/.config/opencode/opencode.json loading
13: INFO  2026-06-11T20:22:44 +1ms service=config path=/root/.config/opencode/opencode.jsonc loading
14: INFO  2026-06-11T20:22:44 +32ms service=default directory=/ creating instance
15: INFO  2026-06-11T20:22:44 +1ms service=project directory=/ fromDirectory
16: INFO  2026-06-11T20:22:44 +142ms service=default directory=/root/sandbox/jarvis bootstrapping
17: INFO  2026-06-11T20:22:44 +36ms service=default directory=/ bootstrapping
18: INFO  2026-06-11T20:22:44 +26ms service=config path=/root/sandbox/opencode.json loading
19: INFO  2026-06-11T20:22:44 +17ms service=config path=/root/.opencode/opencode.json loading
20: INFO  2026-06-11T20:22:44 +1ms service=config path=/root/.opencode/opencode.jsonc loading
21: INFO  2026-06-11T20:22:44 +11ms service=config path=/root/.opencode/opencode.json loading
22: INFO  2026-06-11T20:22:44 +1ms service=config path=/root/.opencode/opencode.jsonc loading
23: INFO  2026-06-11T20:22:44 +13ms service=plugin name= loading internal plugin
24: INFO  2026-06-11T20:22:44 +1ms service=plugin name=oG loading internal plugin
25: INFO  2026-06-11T20:22:44 +0ms service=plugin name=$M loading internal plugin
26: INFO  2026-06-11T20:22:44 +1ms service=plugin name=H7 loading internal plugin
27: INFO  2026-06-11T20:22:44 +0ms service=plugin name=YM loading internal plugin
28: INFO  2026-06-11T20:22:44 +0ms service=plugin name=XM loading internal plugin
29: INFO  2026-06-11T20:22:44 +0ms service=plugin name=JM loading internal plugin
30: INFO  2026-06-11T20:22:44 +1ms service=plugin name=zM loading internal plugin
31: INFO  2026-06-11T20:22:44 +0ms service=plugin name=OM loading internal plugin
32: INFO  2026-06-11T20:22:44 +11ms service=plugin name= loading int

…truncated

assistant 52581 tokens · Input 4133 · Output 263 6/11/2026

The web server's session (nimble-garden) shows it created a session at 20:22:53 and only ran the auto-title agent - no user prompt has been submitted yet. The last log entry is from 20:22:57.

The 10% CPU you see is either idle overhead or the snapshot git process (85% CPU doing git add --all since 20:23, which is abnormal - might be snapshotting something huge from /).

bash — opencode session list 2>&1 completed 0s

Input

{
  "command": "opencode session list 2>&1",
  "description": "List opencode sessions to check activity"
}

Output

Session ID                      Title                                          Updated
──────────────────────────────────────────────────────────────────────────────────────
ses_147afc9c3ffe3sloooeLyPn4vR  Restart OpenCode web terminal                  8:27 PM
ses_147a5e684ffeGVrhupNCrXZCUJ  QR safety alert party app mockup               8:22 PM
ses_147b44129ffe2y3n7i6NGk5Grm  Set new OpenRouter API key                     8:09 PM
ses_1547a11a0ffeEMsYCnp5kVEef7  Tailscale not starting on PC                   8:36 AM · 6/9/2026
ses_1676745adffeEYhTirq51tJ1vD  Greeting                                       4:36 PM · 6/5/2026
ses_167b91f9dffeQ7biSw4EmzuLXQ  Check if everything is working                 2:55 PM · 6/5/2026
ses_167ca9baaffee55QQ0kALyCqt2  Chrome crashed again                           2:50 PM · 6/5/2026
ses_16808bbe6ffe4ZTwhevj6Navo8  Greeting                                       2:31 PM · 6/5/2026
ses_1681db4dfffeqedFZkdl3074Sd  Access issue or crash                          2:30 PM · 6/5/2026
ses_1696fda98ffegi2NtpX0sVJQMS  Install OpenSession plugin from OpenCode.cafe  7:25 AM · 6/5/2026
ses_16b9d6d45ffeeZ643jg96mHpCx  Telegram bot token and ID                      5:26 AM · 6/5/2026
ses_16ba96857ffeGc3hWVUddq3j7e  Make Telegram bot run 24/7 on VPS              8:51 PM · 6/4/2026
ses_1950aa417ffeMLObbxikZeviPy  Greeting                                       8:43 PM · 6/4/2026
ses_16bac83e4ffeJNzlehUt46PIxU  Telegram plugin installation check             8:31 PM · 6/4/2026
ses_190f16908ffe0DrYhZhnrFMVaC  New session - 2026-05-28T14:48:07.671Z         2:48 PM · 5/28/2026
ses_190fce6baffeMybOZQDI55WZsv  New session - 2026-05-28T14:35:34.597Z         2:46 PM · 5/28/2026
ses_194fb3d11ffeRHVcz67AFLmAdy  New session - 2026-05-27T19:58:54.702Z         8:01 PM · 5/27/2026
ses_1951e85b6ffeiv6jzNsFhbTRfU  sk-or-v1 API key connection                    7:22 PM · 5/27/2026

bash — ls -la /root/.local/share/opencode/sessions/ 2>/dev/null | tail -5; ls -la /root/.local/share/opencode/snapshot/ 2>/dev/null completed 0s

Input

{
  "command": "ls -la /root/.local/share/opencode/sessions/ 2>/dev/null | tail -5; ls -la /root/.local/share/opencode/snapshot/ 2>/dev/null",
  "description": "Check session and snapshot storage"
}

Output

total 12
drwxr-xr-x 3 root root 4096 Jun 11 20:22 .
drwxr-xr-x 7 root root 4096 Jun 11 20:22 ..
drwxr-xr-x 3 root root 4096 Jun 11 20:22 global

bash — opencode session list --json 2>&1 | python3 -c "import sys,json; data=json.load(sys.stdin); s=[x for x in data if x['id']=='ses_147a5e684ffeGVrhupNCrXZCUJ']; print(json.dumps(s, indent=2))" 2>/dev/null || echo "no json output" completed 0s

Input

{
  "command": "opencode session list --json 2>&1 | python3 -c \"import sys,json; data=json.load(sys.stdin); s=[x for x in data if x['id']=='ses_147a5e684ffeGVrhupNCrXZCUJ']; print(json.dumps(s, indent=2))\" 2>/dev/null || echo \"no json output\"",
  "description": "Check session details as JSON"
}

Output

no json output

bash — opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | head -80 completed 0s

Input

{
  "command": "opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | head -80",
  "description": "Export session to see messages"
}

Output

Exporting session: ses_147a5e684ffeGVrhupNCrXZCUJ
{
  "info": {
    "id": "ses_147a5e684ffeGVrhupNCrXZCUJ",
    "slug": "nimble-garden",
    "projectID": "global",
    "directory": "/",
    "path": "",
    "title": "QR safety alert party app mockup",
    "agent": "build",
    "model": {
      "id": "deepseek-v4-flash-free",
      "providerID": "opencode",
      "variant": "max"
    },
    "version": "1.15.13",
    "cost": 0,
    "tokens": {
      "input": 0,
      "output": 0,
      "reasoning": 0,
      "cache": {
        "read": 0,
        "write": 0
      }
    },
    "time": {
      "created": 1781209373052,
      "updated": 1781209373204
    }
  },
  "messages": [
    {
      "info": {
        "role": "user",
        "time": {
          "created": 1781209373161
        },
        "agent": "build",
        "model": {
          "providerID": "opencode",
          "modelID": "deepseek-v4-flash-free",
          "variant": "max"
        },
        "id": "msg_eb85a1953001omKR7X0n9mRIO4",
        "sessionID": "ses_147a5e684ffeGVrhupNCrXZCUJ"
      },
      "parts": [
        {
          "type": "text",
          "text": "i wanna make an app if people scan a qr code they can tell a staff memeber at party that they dont feel safe or something or dont feel well make me a front end mockup of this in html en css make it look modern and appealing enough put it on http://100.67.221.82:8080 this ip its my tailscale ip also use that port it should be free ",
          "id": "prt_eb85a1955001H1ZsX4pZn9nn2d",
          "sessionID": "ses_147a5e684ffeGVrhupNCrXZCUJ",
          "messageID": "msg_eb85a1953001omKR7X0n9mRIO4"
        }
      ]
    },
    {
      "info": {
        "parentID": "msg_eb85a1953001omKR7X0n9mRIO4",
        "role": "assistant",
        "mode": "build",
        "agent": "build",
        "variant": "max",
        "path": {
          "cwd": "/",
          "root": "/"
        },
        "cost": 0,
        "tokens": {
          "input": 0,
          "output": 0,
          "reasoning": 0,
          "cache": {
            "read": 0,
            "write": 0
          }
        },
        "modelID": "deepseek-v4-flash-free",
        "providerID": "opencode",

bash — opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | python3 -c " import sys, json data = json.load(sys.stdin) msgs = data.get('messages', []) for m in msgs: role = m['info']['role'] for p in m.get('parts', []): if p['type'] == 'text': text = p['text'] print(f'--- {role} ({len(text)} chars) ---') print(text[:500] + ('...' if len(text)>500 else '')) print() " 2>/dev/null completed 6s

Input

{
  "command": "opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | python3 -c \"\nimport sys, json\ndata = json.load(sys.stdin)\nmsgs = data.get('messages', [])\nfor m in msgs:\n    role = m['info']['role']\n    for p in m.get('parts', []):\n        if p['type'] == 'text':\n            text = p['text']\n            print(f'--- {role} ({len(text)} chars) ---')\n            print(text[:500] + ('...' if len(text)>500 else ''))\n            print()\n\" 2>/dev/null",
  "description": "Extract messages from session export"
}

Output

(no output)

bash — opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | tail -50 completed 0s

Input

{
  "command": "opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | tail -50",
  "description": "Check end of session export for response"
}

Output

          "providerID": "opencode",
          "modelID": "deepseek-v4-flash-free",
          "variant": "max"
        },
        "id": "msg_eb85a1953001omKR7X0n9mRIO4",
        "sessionID": "ses_147a5e684ffeGVrhupNCrXZCUJ"
      },
      "parts": [
        {
          "type": "text",
          "text": "i wanna make an app if people scan a qr code they can tell a staff memeber at party that they dont feel safe or something or dont feel well make me a front end mockup of this in html en css make it look modern and appealing enough put it on http://100.67.221.82:8080 this ip its my tailscale ip also use that port it should be free ",
          "id": "prt_eb85a1955001H1ZsX4pZn9nn2d",
          "sessionID": "ses_147a5e684ffeGVrhupNCrXZCUJ",
          "messageID": "msg_eb85a1953001omKR7X0n9mRIO4"
        }
      ]
    },
    {
      "info": {
        "parentID": "msg_eb85a1953001omKR7X0n9mRIO4",
        "role": "assistant",
        "mode": "build",
        "agent": "build",
        "variant": "max",
        "path": {
          "cwd": "/",
          "root": "/"
        },
        "cost": 0,
        "tokens": {
          "input": 0,
          "output": 0,
          "reasoning": 0,
          "cache": {
            "read": 0,
            "write": 0
          }
        },
        "modelID": "deepseek-v4-flash-free",
        "providerID": "opencode",
        "time": {
          "created": 1781209373235
        },
        "id": "msg_eb85a1a330011y5WZaSN1obCf1",
        "sessionID": "ses_147a5e684ffeGVrhupNCrXZCUJ"
      },
      "parts": []
    }
  ]
}

assistant 56478 tokens · Input 532 · Output 347 6/11/2026

It received the QR safety app prompt and started an assistant response, but the response has empty parts: [] and the session hasn't updated since 20:22:53. The serve process is at 10% CPU but seems stuck - no delta updates in the logs for ~5 minutes.

Let me check if it's actually making progress or hung:

bash — ps aux | grep opencode | grep -v grep completed 0s

Input

{
  "command": "ps aux | grep opencode | grep -v grep",
  "description": "Re-check process CPU usage"
}

Output

root      739958  0.0  3.7 11859488 78988 ?      Ssl  Jun05   7:25 node /root/.npm/_npx/96ab324e177a8c2c/node_modules/@grinev/opencode-telegram-bot/dist/cli.js start
root      740368  0.0  0.0 1335048    0 ?        Sl   Jun05   0:01 npm exec @different-ai/opencode-browser agent-gateway
root      740381  0.0  0.0   2876     0 ?        S    Jun05   0:00 sh -c opencode-browser agent-gateway
root      740382  0.0  0.0 1045268    4 ?        Sl   Jun05   0:00 node /root/.npm/_npx/8096bb92ae86a312/node_modules/.bin/opencode-browser agent-gateway
root      740389  0.0  0.1 881956  3984 ?        Sl   Jun05   0:00 /usr/bin/node /root/.npm/_npx/8096bb92ae86a312/node_modules/@different-ai/opencode-browser/bin/agent-gateway.cjs
root      743074  0.0  0.0 11659904 892 ?        Sl   Jun05   0:02 node /root/.config/opencode/node_modules/agent-browser/dist/daemon.js
root      803986 38.3 25.6 75101184 538020 pts/0 Rl+  20:10   7:08 opencode
root      804365  8.8 26.7 75107436 560420 ?     Ssl  20:22   0:37 opencode serve --port 5051 --hostname 0.0.0.0
root      804441 75.0  2.3  55440 49376 ?        Rs   20:23   4:45 git -c core.autocrlf=false -c core.longpaths=true -c core.symlinks=true --git-dir /root/.local/share/opencode/snapshot/global/42099b4af021e53fd8fd4e056c2568d7c2e3ffa8 --work-tree / add --all --sparse --pathspec-from-file=- --pathspec-file-nul

bash — ls -la --time=status /root/.local/share/opencode/log/*.log 2>/dev/null | sort -k8 | tail -5 completed 0s

Input

{
  "command": "ls -la --time=status /root/.local/share/opencode/log/*.log 2>/dev/null | sort -k8 | tail -5",
  "description": "Check if any log file is being actively written"
}

Output

-rw-r--r-- 1 root root    2685 Jun 11 20:28 /root/.local/share/opencode/log/2026-06-11T202754.log
-rw-r--r-- 1 root root    3945 Jun 11 20:28 /root/.local/share/opencode/log/2026-06-11T202825.log
-rw-r--r-- 1 root root 1126971 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T201055.log
-rw-r--r-- 1 root root    4024 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T202907.log
-rw-r--r-- 1 root root    4025 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T202915.log

bash — strace -p 804365 -e trace=network -c -S time 2>&1 | head -20 & sleep 3 kill %1 2>/dev/null wait 2>/dev/null completed 3s

Input

{
  "command": "strace -p 804365 -e trace=network -c -S time 2>&1 | head -20 &\nsleep 3\nkill %1 2>/dev/null\nwait 2>/dev/null",
  "description": "Check if serve process is doing network I/O",
  "timeout": 10000
}

Output

/bin/bash: line 1: strace: command not found

assistant 57585 tokens · Input 809 · Output 86 6/11/2026

The server is working! New log files are being created - it's processing. Let me check the latest:

read — /root/.local/share/opencode/log/2026-06-11T202915.log completed 0s

Input

{
  "filePath": "/root/.local/share/opencode/log/2026-06-11T202915.log"
}

Output

<path>/root/.local/share/opencode/log/2026-06-11T202915.log</path>
<type>file</type>
<content>
1: INFO  2026-06-11T20:29:15 +1486ms service=default version=1.15.13 args=["export","ses_147a5e684ffeGVrhupNCrXZCUJ"] process_role=worker run_id=256b6b7a-6f6f-46e9-9307-d1aa78dcea9d opencode
2: INFO  2026-06-11T20:29:15 +40ms service=file init
3: INFO  2026-06-11T20:29:16 +958ms service=db path=/root/.local/share/opencode/opencode.db opening database
4: INFO  2026-06-11T20:29:16 +49ms service=db count=21 mode=bundled applying migrations
5: INFO  2026-06-11T20:29:17 +338ms service=default directory=/root creating instance
6: INFO  2026-06-11T20:29:17 +3ms service=project directory=/root fromDirectory
7: INFO  2026-06-11T20:29:17 +165ms service=default directory=/root bootstrapping
8: INFO  2026-06-11T20:29:17 +16ms service=config path=/root/.config/opencode/config.json loading
9: INFO  2026-06-11T20:29:17 +1ms service=config path=/root/.config/opencode/opencode.json loading
10: INFO  2026-06-11T20:29:17 +2ms service=config path=/root/.config/opencode/opencode.jsonc loading
11: INFO  2026-06-11T20:29:17 +60ms service=config path=/root/.opencode/opencode.json loading
12: INFO  2026-06-11T20:29:17 +2ms service=config path=/root/.opencode/opencode.jsonc loading
13: INFO  2026-06-11T20:29:17 +46ms service=plugin name= loading internal plugin
14: INFO  2026-06-11T20:29:17 +2ms service=plugin name=oG loading internal plugin
15: INFO  2026-06-11T20:29:17 +0ms service=plugin name=$M loading internal plugin
16: INFO  2026-06-11T20:29:17 +1ms service=plugin name=H7 loading internal plugin
17: INFO  2026-06-11T20:29:17 +1ms service=plugin name=YM loading internal plugin
18: INFO  2026-06-11T20:29:17 +0ms service=plugin name=XM loading internal plugin
19: INFO  2026-06-11T20:29:17 +0ms service=plugin name=JM loading internal plugin
20: INFO  2026-06-11T20:29:17 +0ms service=plugin name=zM loading internal plugin
21: INFO  2026-06-11T20:29:17 +0ms service=plugin name=OM loading internal plugin
22: INFO  2026-06-11T20:29:17 +54ms service=plugin path=@theedgeofrage/opencode-telegram@latest loading plugin
23: INFO  2026-06-11T20:29:17 +6ms service=plugin path=@different-ai/opencode-browser loading plugin
24: INFO  2026-06-11T20:29:17 +1ms service=plugin path=opencode-codebase-index loading plugin
25: INFO  2026-06-11T20:29:17 +1ms service=plugin path=opencode-lore loading plugin
26: INFO  2026-06-11T20:29:17 +1ms service=plugin path=oh-my-opencode-slim loading plugin
27: ERROR 2026-06-11T20:29:17 +392ms service=plugin path=oh-my-opencode-slim error=ENOENT: no such file or directory, open '/root/.cache/opencode/packages/oh-my-opencode-slim@latest/node_modules/oh-my-opencode-slim/package.json' failed to resolve plugin server entry
28: INFO  2026-06-11T20:29:17 +15ms service=bus type=session.error publishing
29: ERROR 2026-06-11T20:29:18 +16ms service=plugin path=opencode-lore target=file:///root/.cache/opencode/packages/opencode-lore@latest/node_modules/opencode-lore/src/i

…truncated

read — /root/.local/share/opencode/log/2026-06-11T202825.log completed 0s

Input

{
  "filePath": "/root/.local/share/opencode/log/2026-06-11T202825.log"
}

Output

<path>/root/.local/share/opencode/log/2026-06-11T202825.log</path>
<type>file</type>
<content>
1: INFO  2026-06-11T20:28:57 +37725ms service=default version=1.15.13 args=["export","ses_147a5e684ffeGVrhupNCrXZCUJ"] process_role=worker run_id=256b6b7a-6f6f-46e9-9307-d1aa78dcea9d opencode
2: INFO  2026-06-11T20:28:57 +127ms service=file init
3: INFO  2026-06-11T20:28:58 +1026ms service=db path=/root/.local/share/opencode/opencode.db opening database
4: INFO  2026-06-11T20:28:58 +31ms service=db count=21 mode=bundled applying migrations
5: INFO  2026-06-11T20:28:58 +309ms service=default directory=/root creating instance
6: INFO  2026-06-11T20:28:58 +14ms service=project directory=/root fromDirectory
7: INFO  2026-06-11T20:28:58 +188ms service=default directory=/root bootstrapping
8: INFO  2026-06-11T20:28:58 +17ms service=config path=/root/.config/opencode/config.json loading
9: INFO  2026-06-11T20:28:58 +2ms service=config path=/root/.config/opencode/opencode.json loading
10: INFO  2026-06-11T20:28:58 +1ms service=config path=/root/.config/opencode/opencode.jsonc loading
11: INFO  2026-06-11T20:28:58 +88ms service=config path=/root/.opencode/opencode.json loading
12: INFO  2026-06-11T20:28:58 +2ms service=config path=/root/.opencode/opencode.jsonc loading
13: INFO  2026-06-11T20:28:58 +34ms service=plugin name= loading internal plugin
14: INFO  2026-06-11T20:28:58 +1ms service=plugin name=oG loading internal plugin
15: INFO  2026-06-11T20:28:58 +1ms service=plugin name=$M loading internal plugin
16: INFO  2026-06-11T20:28:58 +1ms service=plugin name=H7 loading internal plugin
17: INFO  2026-06-11T20:28:58 +0ms service=plugin name=YM loading internal plugin
18: INFO  2026-06-11T20:28:58 +0ms service=plugin name=XM loading internal plugin
19: INFO  2026-06-11T20:28:58 +0ms service=plugin name=JM loading internal plugin
20: INFO  2026-06-11T20:28:58 +0ms service=plugin name=zM loading internal plugin
21: INFO  2026-06-11T20:28:58 +1ms service=plugin name=OM loading internal plugin
22: INFO  2026-06-11T20:28:58 +30ms service=plugin path=@theedgeofrage/opencode-telegram@latest loading plugin
23: INFO  2026-06-11T20:28:58 +4ms service=plugin path=@different-ai/opencode-browser loading plugin
24: INFO  2026-06-11T20:28:58 +1ms service=plugin path=opencode-codebase-index loading plugin
25: INFO  2026-06-11T20:28:58 +0ms service=plugin path=opencode-lore loading plugin
26: INFO  2026-06-11T20:28:58 +1ms service=plugin path=oh-my-opencode-slim loading plugin
27: ERROR 2026-06-11T20:28:59 +468ms service=plugin path=oh-my-opencode-slim error=ENOENT: no such file or directory, open '/root/.cache/opencode/packages/oh-my-opencode-slim@latest/node_modules/oh-my-opencode-slim/package.json' failed to resolve plugin server entry
28: INFO  2026-06-11T20:28:59 +2ms service=bus type=session.error publishing
29: ERROR 2026-06-11T20:28:59 +10ms service=plugin path=opencode-lore target=file:///root/.cache/opencode/packages/opencode-lore@latest/node_modules/opencode-lore/sr

…truncated

read — /root/.local/share/opencode/log/2026-06-11T202907.log completed 0s

Input

{
  "filePath": "/root/.local/share/opencode/log/2026-06-11T202907.log"
}

Output

<path>/root/.local/share/opencode/log/2026-06-11T202907.log</path>
<type>file</type>
<content>
1: INFO  2026-06-11T20:29:07 +1286ms service=default version=1.15.13 args=["export","ses_147a5e684ffeGVrhupNCrXZCUJ"] process_role=worker run_id=256b6b7a-6f6f-46e9-9307-d1aa78dcea9d opencode
2: INFO  2026-06-11T20:29:07 +63ms service=file init
3: INFO  2026-06-11T20:29:08 +785ms service=db path=/root/.local/share/opencode/opencode.db opening database
4: INFO  2026-06-11T20:29:08 +536ms service=db count=21 mode=bundled applying migrations
5: INFO  2026-06-11T20:29:09 +223ms service=default directory=/root creating instance
6: INFO  2026-06-11T20:29:09 +5ms service=project directory=/root fromDirectory
7: INFO  2026-06-11T20:29:09 +290ms service=default directory=/root bootstrapping
8: INFO  2026-06-11T20:29:09 +40ms service=config path=/root/.config/opencode/config.json loading
9: INFO  2026-06-11T20:29:09 +4ms service=config path=/root/.config/opencode/opencode.json loading
10: INFO  2026-06-11T20:29:09 +1ms service=config path=/root/.config/opencode/opencode.jsonc loading
11: INFO  2026-06-11T20:29:09 +147ms service=config path=/root/.opencode/opencode.json loading
12: INFO  2026-06-11T20:29:09 +9ms service=config path=/root/.opencode/opencode.jsonc loading
13: INFO  2026-06-11T20:29:09 +68ms service=plugin name= loading internal plugin
14: INFO  2026-06-11T20:29:09 +4ms service=plugin name=oG loading internal plugin
15: INFO  2026-06-11T20:29:09 +0ms service=plugin name=$M loading internal plugin
16: INFO  2026-06-11T20:29:09 +1ms service=plugin name=H7 loading internal plugin
17: INFO  2026-06-11T20:29:09 +0ms service=plugin name=YM loading internal plugin
18: INFO  2026-06-11T20:29:09 +0ms service=plugin name=XM loading internal plugin
19: INFO  2026-06-11T20:29:09 +0ms service=plugin name=JM loading internal plugin
20: INFO  2026-06-11T20:29:09 +0ms service=plugin name=zM loading internal plugin
21: INFO  2026-06-11T20:29:09 +1ms service=plugin name=OM loading internal plugin
22: INFO  2026-06-11T20:29:09 +46ms service=plugin path=@theedgeofrage/opencode-telegram@latest loading plugin
23: INFO  2026-06-11T20:29:09 +5ms service=plugin path=@different-ai/opencode-browser loading plugin
24: INFO  2026-06-11T20:29:09 +2ms service=plugin path=opencode-codebase-index loading plugin
25: INFO  2026-06-11T20:29:09 +1ms service=plugin path=opencode-lore loading plugin
26: INFO  2026-06-11T20:29:09 +1ms service=plugin path=oh-my-opencode-slim loading plugin
27: ERROR 2026-06-11T20:29:10 +648ms service=plugin path=opencode-lore target=file:///root/.cache/opencode/packages/opencode-lore@latest/node_modules/opencode-lore/src/index.ts error=Cannot find module '@loreai/core' from '/root/.cache/opencode/packages/opencode-lore@latest/node_modules/opencode-lore/src/index.ts' failed to load plugin
28: INFO  2026-06-11T20:29:10 +3ms service=bus type=session.error publishing
29: ERROR 2026-06-11T20:29:10 +1ms service=plugin path=oh-my-opencode-slim error=ENOENT: no such

…truncated

assistant 63074 tokens · Input 3143 · Output 160 6/11/2026

The new log files are all from my opencode export commands, not from the server processing. The problem is the git snapshot process running git add --all on / (the root filesystem) - it's been hung for 5+ minutes at 75% CPU, snapshotting the entire root directory. That's likely blocking the server.

bash — kill 804441 && sleep 1 && ps aux | grep "git add" | grep -v grep completed 1s

Input

{
  "command": "kill 804441 && sleep 1 && ps aux | grep \"git add\" | grep -v grep",
  "description": "Kill hung git snapshot process"
}

Output

(no output)

bash — sleep 2 && ps aux | grep "opencode serve" | grep -v grep && echo "---" && opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | python3 -c " import sys, json data = json.load(sys.stdin) msgs = data.get('messages', []) for m in msgs: role = m['info']['role'] parts = m.get('parts', []) for p in parts: if p['type'] == 'text': print(f'[{role}] {len(p[\"text\"])} chars') if role == 'assistant' and len(p['text']) > 0: print(p['text'][:200]) if not parts: print(f'[{role}] (empty)') print(f'Updated: {data[\"info\"][\"time\"][\"updated\"]}') " completed 0s

Input

{
  "description": "Check serve process CPU and re-export session",
  "command": "sleep 2 && ps aux | grep \"opencode serve\" | grep -v grep && echo \"---\" && opencode export ses_147a5e684ffeGVrhupNCrXZCUJ 2>&1 | python3 -c \"\nimport sys, json\ndata = json.load(sys.stdin)\nmsgs = data.get('messages', [])\nfor m in msgs:\n    role = m['info']['role']\n    parts = m.get('parts', [])\n    for p in parts:\n        if p['type'] == 'text':\n            print(f'[{role}] {len(p[\\\"text\\\"])} chars')\n            if role == 'assistant' and len(p['text']) > 0:\n                print(p['text'][:200])\n    if not parts:\n        print(f'[{role}] (empty)')\nprint(f'Updated: {data[\\\"info\\\"][\\\"time\\\"][\\\"updated\\\"]}')\n\"",
  "timeout": 15000
}

Output

root      804365  8.9 29.1 75107436 610328 ?     Ssl  20:22   0:40 opencode serve --port 5051 --hostname 0.0.0.0
---
Traceback (most recent call last):
  File "<string>", line 3, in <module>
  File "/usr/lib/python3.10/json/__init__.py", line 293, in load
    return loads(fp.read(),
  File "/usr/lib/python3.10/json/__init__.py", line 346, in loads
    return _default_decoder.decode(s)
  File "/usr/lib/python3.10/json/decoder.py", line 337, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python3.10/json/decoder.py", line 355, in raw_decode
    raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

bash — pm2 logs opencode-server --lines 20 --nostream 2>/dev/null | grep -v "Warning: OPENCODE" | tail -20 completed 0s

Input

{
  "command": "pm2 logs opencode-server --lines 20 --nostream 2>/dev/null | grep -v \"Warning: OPENCODE\" | tail -20",
  "description": "Check serve process logs without password warning spam",
  "timeout": 10000
}

Output

3|opencode | 
3|opencode | ServeError
3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181347.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181349.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181351.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181352.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [91m[1mError: [0mUnexpected error, check log file at /root/.local/share/opencode/log/2026-05-28T181354.log for more details
3|opencode | 
3|opencode | ServeError
3|opencode | [codebase-index] Skipping file watching and auto-indexing: no project marker found in "/root/sandbox/jarvis". Set "indexing.requireProjectMarker": false in config to override.
3|opencode | [codebase-index] Skipping file watching and auto-indexing: no project marker found in "/root/sandbox/jarvis". Set "indexing.requireProjectMarker": false in config to override.

bash — cat /root/.local/share/opencode/log/2026-06-11T202226.log | tail -20 completed 0s

Input

{
  "command": "cat /root/.local/share/opencode/log/2026-06-11T202226.log | tail -20",
  "description": "Check if web server log was updated",
  "timeout": 5000
}

Output

INFO  2026-06-11T20:29:53 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +35ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +32ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +1ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +32ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +33ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +33ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +0ms service=bus type=message.part.delta publishing
INFO  2026-06-11T20:29:53 +103ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:29:53 +9ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:29:54 +603ms service=permission permission=todowrite pattern=* action={"permission":"*","action":"allow","pattern":"*"} evaluated
INFO  2026-06-11T20:29:54 +4ms service=bus type=todo.updated publishing
INFO  2026-06-11T20:29:54 +27ms service=bus type=message.part.updated publishing
INFO  2026-06-11T20:29:54 +21ms service=bus type=message.part.updated publishing

bash — ls -la /root/.local/share/opencode/log/*.log 2>/dev/null | sort -k8 completed 0s

Input

{
  "description": "Check current file sizes of all logs",
  "command": "ls -la /root/.local/share/opencode/log/*.log 2>/dev/null | sort -k8"
}

Output

-rw-r--r-- 1 root root    4348 Jun 11 20:21 /root/.local/share/opencode/log/2026-06-11T202120.log
-rw-r--r-- 1 root root    8625 Jun 11 20:21 /root/.local/share/opencode/log/2026-06-11T202130.log
-rw-r--r-- 1 root root     773 Jun 11 20:22 /root/.local/share/opencode/log/2026-06-11T202207.log
-rw-r--r-- 1 root root    2685 Jun 11 20:28 /root/.local/share/opencode/log/2026-06-11T202754.log
-rw-r--r-- 1 root root    3945 Jun 11 20:28 /root/.local/share/opencode/log/2026-06-11T202825.log
-rw-r--r-- 1 root root   36824 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T202226.log
-rw-r--r-- 1 root root    4024 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T202907.log
-rw-r--r-- 1 root root    4025 Jun 11 20:29 /root/.local/share/opencode/log/2026-06-11T202915.log
-rw-r--r-- 1 root root 1292199 Jun 11 20:30 /root/.local/share/opencode/log/2026-06-11T201055.log
-rw-r--r-- 1 root root    3867 Jun 11 20:30 /root/.local/share/opencode/log/2026-06-11T202958.log
-rw-r--r-- 1 root root    8288 Jun 11 20:30 /root/.local/share/opencode/log/2026-06-11T203004.log

assistant 66163 tokens · Input 1188 · Output 125 6/11/2026

Yes, it's working now! The log file grew from 116 lines to 36KB and shows message.part.delta events - the model is actively streaming a response after the git snapshot process was killed.

read — /root/.local/share/opencode/log/2026-06-11T202226.log completed 0s

Input

{
  "filePath": "/root/.local/share/opencode/log/2026-06-11T202226.log",
  "offset": 100
}

Output

<path>/root/.local/share/opencode/log/2026-06-11T202226.log</path>
<type>file</type>
<content>
100: INFO  2026-06-11T20:22:53 +11ms service=bus type=session.created publishing
101: INFO  2026-06-11T20:22:53 +1ms service=bus type=session.updated publishing
102: INFO  2026-06-11T20:22:53 +104ms service=bus type=session.next.agent.switched publishing
103: INFO  2026-06-11T20:22:53 +4ms service=bus type=session.next.model.switched publishing
104: INFO  2026-06-11T20:22:53 +24ms service=bus type=message.updated publishing
105: INFO  2026-06-11T20:22:53 +5ms service=bus type=message.part.updated publishing
106: INFO  2026-06-11T20:22:53 +9ms service=bus type=session.updated publishing
107: INFO  2026-06-11T20:22:53 +10ms service=bus type=session.status publishing
108: INFO  2026-06-11T20:22:53 +1ms service=session.prompt session.id=ses_147a5e684ffeGVrhupNCrXZCUJ step=0 loop
109: INFO  2026-06-11T20:22:53 +16ms service=bus type=message.updated publishing
110: INFO  2026-06-11T20:22:53 +27ms service=llm providerID=opencode modelID=deepseek-v4-flash-free session.id=ses_147a5e684ffeGVrhupNCrXZCUJ small=true agent=title mode=primary stream
111: INFO  2026-06-11T20:22:53 +2ms service=provider status=started providerID=opencode getSDK
112: INFO  2026-06-11T20:22:53 +0ms service=provider providerID=opencode pkg=@ai-sdk/openai-compatible using bundled provider
113: INFO  2026-06-11T20:22:53 +7ms service=provider status=completed duration=7 providerID=opencode getSDK
114: INFO  2026-06-11T20:22:53 +35ms service=default llm.runtime=ai-sdk llm.provider=opencode llm.model=deepseek-v4-flash-free llm runtime selected
115: INFO  2026-06-11T20:22:53 +118ms service=snapshot initialized
116: INFO  2026-06-11T20:22:57 +4292ms service=bus type=session.updated publishing
117: WARN  2026-06-11T20:29:48 +410589ms service=snapshot exitCode=1 stderr= failed to add snapshot files
118: INFO  2026-06-11T20:29:48 +51ms service=snapshot hash=4b825dc642cb6eb9a060e54bf8d69288fbee4904 cwd=/ git=/root/.local/share/opencode/snapshot/global/42099b4af021e53fd8fd4e056c2568d7c2e3ffa8 tracking
119: INFO  2026-06-11T20:29:48 +6ms service=session.tools status=started resolveTools
120: INFO  2026-06-11T20:29:48 +40ms service=shell-tool shell=/bin/bash shell tool using shell
121: INFO  2026-06-11T20:29:48 +3ms service=tool.registry status=started invalid
122: INFO  2026-06-11T20:29:48 +1ms service=tool.registry status=completed duration=1 invalid
123: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=started question
124: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=completed duration=0 question
125: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=started bash
126: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=completed duration=0 bash
127: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=started read
128: INFO  2026-06-11T20:29:48 +0ms service=tool.registry status=completed duration=0 read
129: INFO  2026-06-11T20:29:48 +1ms service=t

…truncated

assistant 77393 tokens · Input 10873 · Output 90 6/11/2026

It's actively working now. After the git snapshot was killed (it had blocked the server for ~7 minutes doing git add --all on /), the LLM started processing at 20:29:48. It's been streaming message.part.delta events since 20:29:51 and has progressed to creating a todo list and publishing updates. The response should be appearing in the web interface now.

user opencode/deepseek-v4-flash-free 6/11/2026

can i shutdown my pc after i sent te message?

assistant 77647 tokens · Input 96 · Output 43 6/11/2026

Yes, the server runs on the VPS via pm2 (persistent, auto-restart on crash). Shutting down your PC won't affect it - the response will be waiting when you come back.